Noise Reduction In Hearing Aids :: essays research papers

deep in a local listening clinic, a clients concerns were discussed. Im afr promote I wont handle them. My brother in law bought ii consultation attend tos, and he keeps them in a drawer in the kitchen. While the number of people dissatisfy with their hearing aids hovers around 50%, the hearing aid manufacturing is hard pressed to decrease the number of returns, and increase the average r awayine use of each aid. In order to accomplish this, hearing aid manufacturers must answer the most often heard complaint It doesnt work well in commotion. Unfortunately, a hearing aid leave alone never be able to accomplish the sifting and sorting that is carried out in the human brain. While a person with normal hearing sits in a restaurant, he can distinguish a conversational speech signal that is as little as three decibels greater than the ambient noise. On the other hand, a person with a 30-decibel sensorineural loss might need the speech signal to be 15 or more decibels greater t han the ambient noise. The hearing aids task is to acoustically or electronically compensate for both the neurological shortcomings of the hearing impaired person and the wide band increase intrinsic in any basic amplifier. Acoustic compensation can be carried out in a hearing aid microphone. Most hearing aids today utilize omnidirectional microphones, which pick up live equally from all directions. This may be beneficial and practical in some cases, as in the completely in the canal (CIC) aid. The CIC aid uses the natural funneling of the auricle in order to focalise sound straightway into the instrument. Behind-the-ear (BTE) and full concha in-the-ear (ITE) aids lose this anatomical feature, and may benefit from a directional microphone. The purpose of using a directional microphone is to focus its sensitivity toward the front of the listener, thereby attenuating or reducing unwanted noise or competition emanating from behind the listener. (Stach 1998) Microphone directionalit y can be accomplished by using a single microphone with two sound inlets. In this mechanical method, the time lag created by a sound entering each inlet is precisely calibrated to actuate out sounds from the sides and back of the microphone as they strike the diaphragm. The Phonak MicroZoom&61668 uses an electronic approach. to each one MicroZoom&61668 contains two omnidirectional microphones. According to the flyer, One picks up sound in front of you while a second picks up sound from the sides and rear.